How do you care for golf clubs / shafts / grips?
With just a few routines, your golf clubs will remain clean , grippy , and consistently playable . Here you'll find a simple care plan for bowls , shafts (graphite & steel) and handles – plus direct links to Workshop service , handle and shaft guide and fitting .
Workshop: Handle replacement & service More about handles More about shafts Book a fitting at nextclubs
Cleaning hair dryers – here's how to do it gently
- Remove coarse dirt: Soak with lukewarm water and a little mild dish soap.
- Clean the grooves: Use a soft brush (e.g. nylon) or a toothpick to clean the grooves.
- Drying: Dry thoroughly with a microfiber cloth – especially at edges and screws.
- Protection: Use headcovers on woods/hybrids/putters to avoid "bag chatter".
Shaft maintenance – Graphite & Steel
| material | do | Don't |
|---|---|---|
| graphite | Wipe with a damp cloth after the round; check for chafing; use boot pockets/inserts. | Do not use harsh cleaners; do not rub dry to avoid scratches. |
| Steel | Wipe clean and dry completely; if necessary, apply a very thin coat of sealant (cloth, no oil film on the handle/striking surface). | Do not use steel wool on chrome-plated areas; leave moisture in the bag. |
Clean handles and replace them in good time
- Cleaning: Wash with warm water and mild soap, rinse, and allow to air dry.
- Grip check: Smooth, hard, cracked or "slippery"? → Plan for regrip .
- Handle size: The appropriate thickness stabilizes the striking surface and timing – have it adjusted if unsure.
Handle replacement & adjustment (workshop) Open Grip guide
Storage & Transport
- Store in a dry place: After rain/moisture, open the bag and dry the racket – to avoid rust and odors.
- Protection in the car: No heat build-up areas (e.g., a hot car) – adhesives and handles will thank you.
- When traveling: Use a travel cover with padding and head fixation.
Your care plan (short & practical)
| When? | What? | Why? |
|---|---|---|
| After each round | Wipe heads and shafts, briefly clean grooves, put on headcovers | Constant ball contact & protection against corrosion/bag chatter |
| Regularly | Clean handles with water/soap, dry the inside of the bag. | More support and feel; longer lifespan |
| In case of abnormalities | Grip change, loft/lie check, shaft inspection | Ensure stability and consistency early on |
Used items selection – browse directly
Current stock and specifications at nextclubs:
Dispose of old rackets?
Purchase: Request an individual offer Optional: Check before upgrading
FAQ
Is soap and water sufficient for cleaning the handle?
Yes – mild dish soap reliably removes sweat and dirt. Rinse with clean water afterwards and let it dry.
Can I use a wire brush for grooves?
For chrome-plated putter heads, it's best to use nylon/plastic. Wire can scratch surfaces – especially on putters/woods, so it's a no-go.
Will heat damage my rackets?
Yes – high temperatures can damage adhesives, plastics, and handles. Do not store in a hot car.
How do I know when it's time to change the handle?
If the handle feels smooth, hard, cracked, or "greasy"—or if you find yourself gripping it frequently—then schedule a service appointment .
Can I discuss care and setup during one appointment?
Yes – during the fitting we check grips/specifications and give you a clear plan for care & upgrades.